2006
13’w X 8’h X 8’d (approx.)
SOLD
High Dive uses one inch chrome ball bearings. The bearings are lifted to the top of the piece by both a rotating magnent lift and a chain lift. The balls are collected at the top in a small tube. Once five balls fill the tube it tips, releasing them all down the ramp towards a jump. The jump launches the balls backwards through the air onto a short track.
This track leads to what was once a large satellite dish. The balls enter the dish and circle for about a minute and a half until they hit the rubber bumpers towards the center and bounce around until they randomly fall through the small hole at the center and roll back to the start.
